MSF

The magnetic steel filter is an inline filter that filters out fine steel particles. This filter will not clog and is cleanable. It is placed after the coolant pump and before any paper filters that may also be installed.

This filter is free flowing with no restriction to flow. It will work with 1/8 hp lathe coolant pumps & high pressure pumps.

This is a one micron filter kit. It is compatible with both water soluble and oil based cutting fluids. The filter element is disposable and made from spun polypropylene, so it won't dissolve or burst under pressure.

The kit includes filter wrench, mounting bracket and fittings for 3/8" tubing, filter body and one 1ľ filter element. Replacement elements available from GTR Tooling.

Video content: Whether you purchased a flushing system from G.T.R., or built your own, (or are about to do either), you will want this full information video, which will save you time & money. Topics covered in this two hour video include: high pressure pumps ~ motors ~ fittings ~ pressure relief valves ~ coolant tanks ~ tubing ~ line routing ~ accessory manifolds ~ motor mount fixtures for pump & motor ~ lathe chip pan prep ~ reamers (piloted and unpolluted, as well as carbide) ~ cutting fluids ~ water-sol oil ~ mineral oil. 2 hours.