|
|
INDICATOR RODS |
|
Indicator rods use removable bushings just as reamers do. Bushings by Pacific Precision,
JGS, Henrickson, Francis, Forgreens, and Elliot will fit. These rods are for chambered
barrels. If you chamber with the barrel held by a 4-jaw chuck and the muzzle extends
through the spindle bore, and are trying to indicate the bore in for a rechamber , you
found the answer. The rod centers itself with the pilot bushing and a 3 deg. taper ground onto the precision ground mandrel . So even though the chamber may or may not be cut straight, you know where the bore is and only indicate to it , and cut a new chamber .
|
 |
Rods are made in .22 through .375 cal. Metric bores, 6mm through 10mm |
RANGE RODS |
Range rods are for indicating non-chambered barrels. They are built with the same features as indicator rods except they have a 1.5 deg. taper , and are shorter in length. |
| As above, rods come in the same range of calibers. |  |
|
